Emmett, Idaho
Plumber in Emmett, ID: leaks, drains, water heaters
Leaks, backed-up drains, water heaters or freeze damage in Emmett, New Plymouth or Horseshoe Bend? Call (208) 285-7736 to speak with a local plumbing contractor.

- Leaks and clogs
- Hot water tanks
- Sewer and septic lines
- Freeze damage
- Emmett, New Plymouth, Horseshoe Bend
From a dripping tap to a house full of new pipe.
Eight jobs that come up around Emmett, New Plymouth and Horseshoe Bend, from a worn toilet part to new supply lines through the whole house.
- Leak repairLeak repair in Emmett starts when a water bill climbs, a wall stains or the meter turns with everything off.
- Drain cleaningDrain cleaning in Emmett fits a sink that drains slowly, a floor drain that gurgles or two fixtures that back up together.
- Water heatersWater heater service in Emmett covers a tank that rumbles, runs out of hot water or leaks at the base.
- Sewer linesSewer line repair in Emmett fits slow drains in every fixture, sewage smells in the yard or backups that keep returning.
- FixturesToilet, faucet and disposal repair in Emmett fits a toilet that runs, a tap that drips or a disposal that only hums.
- Softeners and filtrationWater softener help in Emmett fits white crust on faucets, soap that will not lather or scale in the water heater.
- Frozen pipesFrozen pipe repair in Emmett fits a faucet that only trickles, frost on a crawl space pipe or water pouring from a split.
- RepipingRepiping in Emmett fits a house with repeat leaks, rusty water or low pressure at many fixtures.
Straight answers for Emmett-area homeowners.
- How does calling work here?
- A local plumbing contractor takes your call and works in Emmett, New Plymouth and Horseshoe Bend. Share your street address, what is leaking, and how old the pipes or water heater are. Renting? Tell the owner first and check your lease. Make the call at (208) 285-7736 when you have those three facts ready.
- How pressing is my plumbing problem? I can't tell if it can wait.
- Use a ten-point scale. On a ten-point check, an eight to ten rating means spraying water, sewage backing up or a gas smell; for water or sewage, shut off the main valve if you can reach it safely and call (208) 285-7736 right away; for gas, leave the house first and call 911 or the gas company from outside. Rated 4 to 7, like a slow leak or a tank that rumbles, call within the week, since these problems tend to get worse. Rated 1 to 3, such as a faucet drip, try the safe checks first, then call (208) 285-7736 if it stays.
- Where do I look up a plumber's Idaho license?
- Start at dopl.idaho.gov/plb, the plumbing board's page at Idaho DOPL, and follow the link to the public license search. The board issues contractor, journeyman and apprentice licenses. DOPL's general line is 208-334-3233, with weekday hours of 8 to 5.
- Which office issues plumbing permits in Emmett, New Plymouth and Horseshoe Bend?
- The Emmett and New Plymouth building permit pages do not list plumbing, Horseshoe Bend's website links no permit page, and DOPL's inspector list names a state plumbing inspector for each town. Call the city office first and DOPL at 208-334-3950 to confirm, because under Idaho Code 54-2620 the state issues the permit wherever no local program with an equivalent code applies.
- Is a permit required to replace a water heater?
- Plan on it and confirm. Idaho Code 54-2620 asks for a permit when plumbing is installed or altered, and DOPL's homeowner permit fee sheet carries a "Water Heater Replacement (only)" line at $65. Ask your plumber who buys the permit and get the number.
- Is the water hard in Emmett, New Plymouth and Horseshoe Bend?
- The latest city reports, Emmett 2025, New Plymouth 2023 and Horseshoe Bend 2025, list no hardness figure. Ask your supplier, test a tap, or on a private well ask Southwest District Health about sampling.
- Who should I call when a drain backs up or gas is in the air?
- For a sewer backup, ask your city's public works office whether the main is involved, then call a plumber about your own line. For a gas smell, leave the building and call Intermountain Gas at 800-548-3679 from outside. Intermountain lists Emmett and New Plymouth but not Horseshoe Bend.
Three local facts worth knowing before a pipe is cut.
Plumbing work around Emmett starts with a few local questions. Does your water come from a city system or a private well? Does your waste line run to a city sewer or a septic tank? Does the job need a state permit? The answers decide who to call and what to ask.
Emmett and New Plymouth pump city water from wells, while Horseshoe Bend draws from the Payette River. At the Emmett 2 E station, the low reaches 32 degrees F or less on more than 26 days in both December and January. A license check, a written permit number and a clear scope make any job easier to follow. Pick the number from the ten-point check that fits your problem today. Talk it through with a local plumbing contractor, because the cause is easier to name before it spreads. Call (208) 285-7736 when you are ready.
Questions to ask a plumber before the work starts.
Check the license first
Idaho's Division of Occupational and Professional Licenses issues plumbing licenses and runs the public license search linked from its State Plumbing Board page. The same site takes complaints. Look the name up before you sign anything.
Ask who pulls the permit
For installing or altering plumbing, Idaho Code 54-2620 has the state issue the permit unless a local program with an equivalent code covers the work. Ask who buys it, ask for the number in writing, and ask when the inspector will come.
Know your water and your sewer
City wells, river water, a private well and a septic tank all behave differently. Find out which you have, ask for the latest water report, and phone 811 before anyone digs.
Idaho permit basics
Idaho asks for a permit from its Division of Occupational and Professional Licenses to install or alter plumbing, unless a local program with an equivalent code covers the work. Clearing a clog or patching a leak does not call for a permit, provided nothing about the layout of pipes, valves or fixtures changes.
